EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN Collection CONTROLLE
EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Demand Controller is really a remarkably efficient solar controller made for off-grid solar techniques. Dependant on multiphase synchronous rectification engineering, it assures optimized Strength conversion and process steadiness for a variety of photovoltaic (PV) purposes.
Key Attributes in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Charge Controller technologies for outstanding solar Vitality harvesting. Crucial characteristics incorporate:
Multiphase Synchronous Rectification (MSR) for improved Vitality conversion.
Innovative MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for enhanced battery existence.
Liquid crystal display Exhibit with authentic-time knowledge checking.
Various Load Manage Modes which include manual and timer.
Complete Digital Protections towards overcharging, about-discharging, brief circuits, and reverse polarity.
Move-by-Stage Manual to Starting the EPEVER Tracer AN Sequence Controller
1. Unboxing and Making ready the Controller
Assure all parts are provided: Tracer AN unit, temperature sensor, communication cables, and consumer guide.
Validate the model variety and voltage ratings match your photo voltaic panel and battery specs.
two. Mounting the Cost Controller
Decide on a effectively-ventilated, dry spot near the battery financial institution.
Protected the Tracer AN controller using the supplied mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Solar Demand Controller
Warning: Constantly stick to correct protection protocols and ensure the procedure is run off in advance of connecting elements.
Step one: Hook up the battery terminals towards the charge controller (beneficial to constructive, unfavorable to negative).
Move 2: Connect the solar panel array to your PV enter terminals.
Move three: Join the load terminals if employing a immediate load link.
Stage four: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Settings
Ability to the controller by connecting the battery very first.
Use the LCD Exhibit to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, mild control.
five. Monitoring and Facts Logging
The Tracer AN Series supports serious-time checking using the MT50 distant meter.
Information is usually logged through the RS485 communication port employing computer software such as Photo voltaic Station PC.
Distant monitoring is achievable Using the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Concern one: No Electrical power Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue 2: Around-Voltage Safety
Validate the solar array’s voltage ranking.
Modify procedure parameters if required.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings while in the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological innovation ensures:
Increased Performance: Decreased Electricity losses throughout conversion.
Increased Click Here Dependability: Secure efficiency underneath variable masses.
Lengthier Battery Daily life: Consistent and correct charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification know-how is an Extraordinary option for optimizing solar power generation and lengthening battery life. By subsequent the above mentioned set up manual, end users can be certain optimum effectiveness and process longevity.